HN-541 water based mostly styrene acrylic polymer emulsion
for haul road design
Applications: for Large duty dust suppression technologies exclusively developed for all mining, civil, design, port and unsealed community street surfaces.
Free of charge samples are available for your tests!
1.Merchandise Description
Positive aspects:
-EPT-term price-financial savings.
-EPTroved visibility and protection
-considerable h2o cost savings
-diminished h2o cart use
-Increased floor EPTevity
-Cures in hours amp will not remobilise
-EPA qualified as non-harmful
Tough EPT long lasting stabilisation.
Soil needs:
Simple soil stabilized highway layout need: 35% fines passing by way of a two hundred sieve and sixty five% granular material in which no stone is bigger than 20% of the layer depth getting stabilized.
The max. one load that the stabilized road will be subjected to must also be estabEPTd.
Application depth:
150mm depth for masses up to forty ton load
200mm depth for hundreds up to 80 tons load
250mm depth for hundreds up to eighty tons load.
Equipment essential:
Equipment technical specs would incEPT: Crusher/Ripper, Spray tanker, Grader, Sleek drum vibration compactor.
Scenario research 1:
Depth: 150mm
Materials: Dry Sand and 5-10mm gravel
Soil Stabilizing Dosage rate: .six ltrs furthermore 4.eight ltrs h2o for every sq mtr.
Complete Liquid: 36 ltrs for every cub mtr.
Best seal: .twenty five ltrs plus .seventy five ltrs h2o for every sq mtr.
If required, other materials can be extra to strengthen the solidity.
Case Examine 2:
EPT required to be stabilized: 1000m*6m
Depth:15cm
Location: 6000sqm
Polymer requiriements: three.6t
End coat:one.5t
Complete polymer necessary: five.1t
two.Specification
3.EPT amp Supply
EPT:
50kgs plastic drum/160kgs plastic drum/200kgs plastic drum/1000kgs IBC pallet/20000kgs soft EPT.
Storage and transportation:
This chemical need to be stored in a ventilated and dry place, staying away from direct sunlight. Otherwise it will very easily cause the emulsion to sort surface area movie.
Transport and store at fiveoC-35oC environment.
Shelf lifestyle is one 12 months from the day of 1st use.
EPT observe:
The drinking water dependent polymer emulsion is non-toXiHu (West Lake) Dis.c and non-flammable. If it splashes into eyes, it should be washed with plenty of drinking water right away then go to hospital.
four.Company Profile
1. Two factories in China. Headquarters is in HangZhou city and the generation factory is in HangZhou metropolis.
2. a hundred and ten,000.00 sq. meters masking spot in whole.
3. Almost thirty several years of water based mostly acrylic polymer manufacturing knowledge.
four. Best course research teams and full automated producing strains.
5. EPT helpful goods.
six. Up to two hundred,000 tons production yearly.
seven. EPT revenue capability.
five.Other applications
Water based mostly acrylic polymer emulsion for:
1. For developing coating software
– HN-one zero one/102/996 for interior and exterior wall paints
– HN-4208/4208A for stone-like paints
– HN-9301C/HN-9311S for multi-colour wall paints
– HN-9301C/HN-9311S for multi-colour wall paints
– HN-01F for wall primers
– HN-314T/519T for wall putties
– HN-340T/HN-332T for water-proof coatings
two. For sealant adhesives software
– HN-154VE for construction sealants
– HN-101D for water-proof sealants
– HN-166T for high elastic silicone
three. Polymer auXiHu (West Lake) Dis.liaries
– AT-01/ATW-60/ATW-2000 Thickening brokers
– WP-19/WP-5040 Dispersing agents
four. Textile adhesives application
– HN-5001 for scree pigment pastes/discharge pastes
– HN-SL530 for soaked curtains bonding
– HN-9827 for sponge adhesives
– HN-2108S/3451HF for glass fibre grid cloth hardening adhesives
– HN-YS861 for wallpaper printing inks
– HN-8321 for EPT Velcro/hook and loop fastener backing adhesives
– HN-6019 for PSA force sensitive adhesives
– HN-NK701 for flexo inks
– HN-PM01 for carpet backing adhesives-s
– HN-MQ603 for wooden household furniture varnish/lacquer
5. Dust suppression application
– HN-541 for street development
– HN-130VA for repeated spray dust management
– HN-152VA for non-air pollution dust management
– HN-158T for substantial finish dust management
6. Metal antirust software
– HN-1019/AC610/02BF for steel antirust
six. Our Labs
seven. FAQ
Q: Are you a trading organization or a producer?
A: We are a manufacturer, not a trading organization. Two factories, one particular is in HangZhou town and the other is in HangZhou town.
Q: How EPT is your guide time?
A: The typical direct time is five-ten days. It is in accordance to the amount and inquire of us prior to spot any orders.
Q:Do you provide free of charge samples? Are the samples free of charge of cost or require to be paid out?
A: Of course, Totally free samples of .5-one kg for every single variety are offered for our consumers. The samples are free but the freigEPT is collected.
Q: What are the conditions of payment?
A: Entire payment is needed in advance ahead of shipment.
Q: How about your analysis ability? Do you offer you specialized assist service?
A: We have our personal analysis labs and tests labs. Several universities and institutes has developed a EPT-time period strategic partnership
with us. We provide complex assistance solutions for our customers.
Q: Can I location a modest orEPTfor very first time to take a look at the high quality?
A: Of course, you can orEPT1-five tons emulsion polymer to run checks in your manufacturing facility for the begin order.
Q: Can I pay a visit to your factory?
A: Yes, you are welcome to visit our production manufacturing facility in HangZhou or headquarters in HangZhou.
Q: Do you settle for customised orders?
A: Sure, we consider customised orders. Please inquire of us just before spot this sort of orders.
Q: Can you assist use deveXiHu (West Lake) Dis.Hu (West Lake) Dis. our possess factory in our own country?
A: Of course, We can support our clients to create their very own factories in their countries. Remember to talk with our director about the
information.
